Blog

What to Consider When Buying Traffic Signs

Sep 29, 2022 Leave a message

What to Consider When Buying Traffic Signs

Traffic cones and barricades are excellent indicators that road construction is going on. However, even these tools cannot accurately convey the direction of oncoming traffic or indicate the nature of the item. This is where placing quality signs in your workspace is critical to increasing communication and overall safety in that environment. Here's what to consider when shopping for traffic signs so you can get what you need.


Type of logo purchased

From parking, yield and pedestrian paddles to arrow boards and roadwork markings, there are a ton of different signs that can be used near a job site. Each of these models conveys different information to the drivers passing through them. Therefore, choosing the correct traffic safety signs is essential to control traffic in an appropriate manner. This is why you should always have a clear idea of which signs you will need before you start buying them. At a minimum, you must have work ahead, markings, lane closures, stop and slow-moving signs available at any given time. When using traffic signs on the road, it is always recommended to check your state or province regulations first.


Desired retroreflectivity

You should also consider the level of retroreflectivity required for a particular job. The amount of reflective material on the surface of the sign determines how much light is reflected when exposed to the headlamp beam. This is key to making it easier for passing drivers to notice signs and increase the likelihood that they will respond accordingly. Three common levels of retroreflectivity are used in traffic safety products.


Engineer Grade or Types I, II, and III: Made of closed lens reflective material, most commonly used for construction area equipment, outlines, and permanent highway signs. Engineer-level nighttime visibility is about 500 feet away.

High Intensity Prism Grade or Types IV, V and VI: This is made with encapsulated lens material and is also used for highway signs, construction area equipment and contour lines. The signs capture a small amount of light and magnify it so it can be seen at night from about 1,000 feet away.

Diamond Grade or Types VII, VIII and IX: This uses a prismatic lens material on the logo to provide the highest reflectivity. These are typically used on faster interstate highways and very dark work areas. They allow the sign to be seen from farther at night—about 1,500 feet.

Visible necessary size

In addition to retroreflectivity, another thing to consider when purchasing a traffic sign is the size of the sign that must be effective. While the right level of reflectivity will ensure your signs are noticed in any situation, the size will make them easier to read by fast-moving drivers. Signs that are too small can be difficult to decipher and can be distracting when drivers have difficulty reading them. Also, too large a flag may obscure other important instructions. So, as a general rule, larger signs are better for fast-moving roads, such as highways, and standard 18- to 30-inch signs are suitable for normal, lower traffic conditions.


 

Send Inquiry