How to reduce the noise of rubber speed bumps?
Many people who drive will realize that the car is very noisy when passing the rubber speed bump. If the method is not correct, it will damage the car and cause great harm. The following will introduce the noise reduction method of rubber deceleration belt:
1. Reduce speed. Using rubber speed bumps to reduce noise is very simple. The slower the speed, the less noise, and the less damage to the vehicle.
2. Then reasonably transform our rubber speed bumps. The setting of the rubber reducer should be based on the road grade and the traffic flow structure of the road section to select the material of the rubber reducer, and through the continuous test of the rubber reducer manufacturer to ensure that our vehicles pass safely and without noise.
3. The rubber speed control belts mainly include cement and cast iron rubber speed control belts. In order to make the driver have a visual impact, it is easy to be found by the driver, so as to guide the driver to actively decelerate.
The following is a brief introduction to the noise reduction method of the rubber deceleration belt. The setting of rubber speed bumps is essential, which greatly reduces the occurrence of traffic accidents. But it cannot be set arbitrarily, it must conform to the rules.