Common traffic safety facilities in parking lots
Essential facilities
Deceleration zone
Speed bumps, also known as speed bumps, speed arches, buffer belts, speed ramps, speed rubbers, speed pads, speed road arches, speed ridges, rubber speed bumps, etc.
Material of speed bumps: Most speed bumps nowadays are made of high-strength rubber. Originally, there were also cement arches and steel pipe arches. The rubber deceleration ridge has excellent shock absorption and compression resistance, long life, less wear on the car, less noise, the color is eye-catching yellow and black, the color is distinct, and it has a high degree of visibility during the day or night.
Shape and size: The surface of the speed bump is arc-shaped, streamlined, trapezoidal, fish-tailed, etc. The shapes and sizes of products produced by different manufacturers are different.
Installation location: Speed bumps are mainly installed on the ground at the entrances and exits of parking lots, up and down slopes and other places.
Installation method: installation is more convenient, usually using standard block arbitrary combination and advanced "internal expansion anchoring technology", firmly fixed on the ground with screws, the installation is firm, stable and reliable, and will not loosen when the vehicle hits.
The role of speed bumps: speed bumps can remind the driver to slow down. When the car passes by, it has muffling and replying functions to prevent traffic accidents due to untimely braking. Some speed bumps are also inlaid with reflectors, which will reflect bright red or green light at night, which can attract the attention of drivers, reduce speed and improve safety.
Bumper strip
Anti-collision strip, also known as anti-collision block, anti-collision glue, corner guard, corner guard glue, corner protector.
Material: Generally rubber. It is a yellow and black rectangular sign. There are also other colors. It is made of high-quality reflective film.
Shape and size: There are many shapes, rounded or right-angled strips, the size is generally 80cm/piece, and some are wrapped in a whole piece around the column.
Installation location: Installed on the parking lot column, corner, and wall behind the parking space. The installation position is 20 cm from the bottom edge of the rubber anti-collision strip to the ground.
Installation method: Embedded in the parking lot partition wall and column corners, and tighten the screws in place with expansion pipes.
Function: In the parking lot, reflective corners must be installed on the projecting parts of the indoor columns or passages. The installation of anti-collision strips in the parking lot can prevent vehicles and other vehicles from hitting the building during driving and turning, or rubbing or colliding with the column, scratching or bumping the paint and the column. The reflective film on the surface can also play a warning and protective role. Even if the driver's negligence causes a collision between the vehicle and the building, the degree of damage can also be reduced.
Price: Generally rounded corners are more expensive than right-angled ones, and the thicker the thickness, the higher the price.
Other facilities
Roadblock
roadblocks, also known as cone-shaped road signs, road cones, protective piles, rubber road signs, red vertebrae barrels.
Material: There are metal and rubber.
Shape and size: Cone-shaped or cylindrical, generally between 30-100cm in height, fixed or movable.
Installation location: installed at the entrance and exit of the parking lot or other places.
Installation method: The moving roadblock can be taken and placed at any time, and screws need to be used to fix it.
Function: The main function is to block the vehicle, which is used to prevent the vehicle from colliding with other buildings or crossing the boundary during driving. It can also be placed in places where vehicles are not allowed to park.
parking lock
Material: Generally made of metal materials. There are two types: remote control and manual.
Shape and size: Generally, the height is about 400mm when standing up, and about 50mm when down. The length and width are between 400-800mm.
Installation location: the center of the parking space.
Installation method: According to the specific conditions of the parking space (depending on the size of the parking space), it is advisable not to hinder other vehicles from reversing after installation. Do not lock the parking space in low-lying places or places with long-term water accumulation. Choose the installation location and drill the ground control on the floor at the corresponding hole of the controller base. Install the expansion screw in the floor hole, put the parking lock, and then tighten the nut, spray the screw with black oil. At this point, the installation is complete, and the surrounding area is cleaned.
Function: Used to be fixed in the center of the parking space to prevent other vehicles from parking randomly. It can only be opened by the user of the parking space with the key.