Industry News

Bollard Materials and Finishes: Steel Stainless and Plastic

May 12, 2026Leave a message

The material of a bollard decides what happens on impact, how it ages in the weather and how it looks to the people who walk past it every day. Steel, stainless steel and plastic each suit different exposures, and the finish is part of that choice rather than an afterthought.

Steel Bollards

Steel gives the highest impact resistance and suits boundaries where vehicle incursion is a real risk. It needs a protective finish because bare steel corrodes at the ground line first, and that is where the load is carried. Galvanising, powder coating and painting are the common finishes and they differ in how long they last in service.

Stainless Steel Bollards

Stainless steel resists corrosion without a coating and holds its appearance in wet and coastal air. It suits public and architectural settings where the look matters as much as the function. It is softer than structural steel, so it is chosen for appearance and corrosion rather than for structural impact duty.

Plastic and Polymer Bollards

Plastic bollards flex on impact and return to shape, which suits marking lanes and guiding traffic rather than stopping it. They are light, cheap to install and visible in bright colours, but they do not give the vehicle resistance of steel and should not be used where that is the requirement.

MaterialBehaviourTypical Fit
SteelHigh impact resistance, needs finishSecurity boundaries
Stainless steelCorrosion resistant, holds appearancePublic and coastal sites
PlasticFlexible and visible, low resistanceTraffic guidance and marking

Finish and Corrosion

The finish is what protects the material underneath and it fails first where it is chipped or where water sits. Ground line detailing, drainage and a finish suited to the exposure extend the life of the bollard more than an upgrade in material does on most sites.

Specifying the Material

State the exposure, the impact duty and the appearance expected. These three points decide the material and finish together, which is how the bollard should be ordered.

Send Inquiry